Menu

Attic Controls

ATMOX Controls - Moisture Control & Heat Reduction

ATMOX Systems offer controlled ventilation of attics with the use of ATMOX Attic Fans.

 

The ATMOX ATTIC Control Sets direct the operation of the fans to run only when a temperature trigger to reduce excessive heat or when “good” dry air is available to reduce moisture levels in the attic. All ATMOX Control Sets come with an inside and outside climate sensor.  Each of these sensors measures temperature and humidity level.  The control set, sensors, and power supply for fans all run from one electrical outlet, allowing for a simpler installation, minimizing or eliminating the need for an electrician. The fans receive power through the use of a low voltage cable (such as those used in landscape lighting wire) that attaches directly to the control set and power supply. Each fan is then spliced onto the wire at the location needed.

 

ATMOX Temperature Contollers will trigger operation of fans only to reduce excessive heat. The Temperature Controller must be used in conjunction with an ATMOX Power Supply or AC Adapter with Plugs.  Controller has a built-in temperature sensor. The fans will receive power through use of a low voltage cable that attaches to controller.  Each fan is then spliced onto the wire at the location needed.

 

All ATMOX controls are assembled in the USA. 

Item: 06-600-150

Item: 06-150-200

Item: 06-300-300

Contact ATMOX

Phone: 704-248-2858 

Email: info@atmox.com