ATMOX APEX Control Set with Sensors

Item:  07-260-K01

Return to Product Catalog



ATMOX APEX Control Set with Sensors

The ATMOX APEX System offers the best attic moisture control system through the use of smart ventilation. The controller uses sensors to monitor conditions in the attic by always measuring temperature and humidity both inside the attic and outside. It uses this information to determine when to operate fans to reduce attic moisture and heat.

Solving Attic Moisture

Each ATMOX APEX Control Set will be setup using different types of fans depending on the house and geographic area and climate. You can learn more about your geographic area and learn more about creating your ideal “ATMOXsphere.”

Attic Moisture Products

Learn how all the ATMOX Attic Products work together. Attics will use fans to dry out the space with outside air. The fans will be placed in gables or ridge vents or other openings depending on your construction. Fans may also be set up internally to move air across attic spaces or to get to hard to reach areas. The fans will only use the outside air when it’s beneficial. It will do this by comparing dew point information calculated from the sensors. It will also look for high heat build up inside the attic.

The ATMOX fans and lights are all low voltage, so they will receive all of their power by using low voltage wire attached to the controller. This means that the setup of components will run from one electrical outlet. This allows for a simple installation, and it minimizes or eliminates the need for an electrician at the installation.

The ATMOX APEX Control Set is the ultimate tool for attic moisture. It will also provide a notification tool to monitor conditions in the attic to give you peace of mind.


  • Usage:  Variable from 1.5-150W
  • Input Voltage:  85-132V AC
  • Output Voltage:  12-13V DC
  • Output Current Range:  0-12.5A
  • Data Input:  2 Temperature/Relative Humidity, 1 Wood Moisture, 1 Water Alert
  • Power Output-APEX:  2 switched, 1 constant


  • Display
  • Controller
  • Outside Temperature and Humidity Sensor
  • Inside Temperature and Humidity Sensor
  • Extension Cables
  • Mounting Plate for Display with Screws and Anchors
  • Supplies Bag – cable couplers, quick splice connectors, banana plugs (red/black, green/black)
  • Installation Guide

ATMOX ACE-APEX Installation Guide