ATMOX ACE Control Set with Sensors

Item:  07-250-K01

Return to Product Catalog


ATMOX ACE Control Set with Sensors

The ATMOX ACE System offers the best crawl space moisture control system through the use of smart ventilation and dehumidification. This controller uses sensors to monitor conditions in the crawl space always measuring the temperature and humidity both inside the crawl space and outside. It uses this information to determine the best operation to improve the conditions of the crawlspace to reduce moisture.

Solving Crawl Space Moisture

Each ATMOX ACE Control Set will use different forms of drying depending on the house and geographic area and climate. You can learn more about your geographic area and learn more about creating your ideal “ATMOXsphere“. You can also learn more about important steps in solving crawl space moisture issues.

Crawl Space Moisture Products Working Together

Learn how all of the ATMOX Crawl Space Products work together. Most controllers will use crawl space fans in vent locations to dry out the space with outside air. The fans will only use outside air when it’s beneficial. It will do this by comparing dew point information calculated from the sensors. Some setups will also use crawl space fans internally to keep air movement. The internal fans will also avoid “dead areas” within the crawl space and assist a dehumidifier. Additionally, some crawl spaces will be equipped with a crawl space dehumidifier that will be controlled by the ATMOX controller to optimize its use.

The ATMOX fans and lights are all low voltage, so they will receive all of their power by using low voltage wire attached to the controller. This means that the setup of components (not including dehumidifier) will run from one electrical outlet. This allows for a simple installation, and it minimizes or eliminates the need for an electrician at the installation.

The ATMOX ACE Control Set is the ultimate tool for crawl space moisture. It will also provide a notification tool to monitor conditions in the crawl space to give you peace of mind.


  • Usage:  Variable from 1.5-150W
  • Input Voltage:  85-132V AC
  • Output Voltage:  12-13V DC
  • Output Current Range:  0-12.5A
  • Data Input:  2 Temperature/Relative Humidity, 1 Wood Moisture, 1 Water Alert
  • Power Output-ACE:  4 switched, 1 constant

Contents of Box:

  • Display
  • Controller
  • Outside Temperature and Humidity Sensor
  • Inside Temperature and Humidity Sensor
  • Extension Cables
  • Mounting Plate for Display with Screws and Anchors
  • Supplies Bag – cable couplers, quick splice connectors, banana plugs (red/black, green/black, orange/black)
  • Installation Guide

ATMOX ACE-APEX Installation Guide