ATMOX Exhaust Fan – 145 CFM – External Mount

Item:  01-350-015

Return to Product Catalog

Description

ATMOX Foundation Fan – External Mount- 145 CFM – Exhaust Fan

The foundation fans mount from the outside of the crawl space in most standard vent openings that have a 16 x 8 inch opening. The fans replace any existing grill in the vent openings so they are aesthetically pleasing. Another benefit is the ease of installation of these fans from the outside.

ATMOX Setup

The foundation fan is one component of the ATMOX System. The system uses an ATMOX controllerfans and/or dehumidifier for the actual drying or moisture control. However, the ATMOX setup is not just fans and/or a drying unit. The ATMOX System is a smart solution using the  ATMOX ACE Controller, the brain of the system, to determine the best operation to improve conditions within your crawl space. It does this through analysis of the combination of dew point, temperature, and humidity. Therefore, the components will run only at optimal times. ATMOX focuses not only on energy efficiency and removing excess moisture but also on air quality. In order to be healthier, indoor air needs to be exchanged with fresh air.

Power Usage

The ATMOX controls use a low voltage 12V DC wire to power the fans. This means the setup of all components (not including a dehumidifier) will run from one electrical outlet. This allows for simple installation, and minimizes or eliminates the need for an electrician at the installation.

An AC Adapter powers these fans in a standard outlet. In this setup, the crawl space fans will run continuously.

Assembled in USA from domestic and foreign parts. Includes 3-year limited product warranty.

Specifications

  • Output: 145 CFM
  • Usage: Measured at 10 W
  • Noise:  34dB
  • Mounting:  Fits standard 16 x 8 inch vent opening
  • Mounts with 4 screws to tighten in place

Spec Sheet – Exhaust Fan – 145 CFM – External Mount

Videos